EXTERIOR WALL SYSTEMS – BASE COATS

Application
Add 2 parts of plaster sand (30 - 70 mesh) to 1 part
Conpro One Coat. Conpro One Coat combines the
scratch and brown coats of conventional stucco systems
into one application. Final thickness will be 3/8 inch when
applied directly to the substrate and up to 1 inch with lath.
Apply Conpro One Coat directly to block, prepared
concrete (remove the cement paste), existing stucco and
brick. Also use with stucco netting, metal or plastic lath.
A wide variety of trowel, roller and spray finishes.