WATER REPELLENTS

Application
One application of Conpro Shield QS2 will provide a semi
gloss finish. Each subsequent application will increase gloss.
Conpro Shield QS2 is an excellent water repellent. Apply with
a low pressure sprayer, roller or brush to a uniform thickness
(3 - 5 mils.) per coat. Allow the first coat to completely cure
before applying an additional coat (5 hours at 75°F).
Sponge or squeegee ponded material. Conpro Shield QS2
will cure to a clear finish within 30 - 60 minutes.
Always apply a sample to determine if the appearance is
satisfactory before beginning work. The substrate must be
completely dry when applying Conpro Shield QS2. Protect
from moisture for a minimum of 24 hours after application.