BELOW-GRADE WATERPROOFING – NEGATIVE SIDE

Application
Conpro Super Seal stops water infiltration by growing
a crystalline structure in the capillaries of concrete.
The crystals block the capillaries and prevent water
from passing. Conpro Super Seal is available in both
white and gray powder and is mixed with water and
Conpro Super Seal Admix to a slurry consistency.
It is essential that the substrate surface is open so the
crystals can grow into the capillaries. A smooth, dense
surface will prevent the crystals from growing into the
substrate. Remove the cement paste from the concrete
to expose the aggregate by sand blasting or high
pressure water blasting. Use a drywall brush or long
handle brush and apply in a circular or figure 8 pattern.
Two coats are required. Additional coats may be applied
if water penetration persists. Mist frequently for 72 hours.