EXTERIOR WALL SYSTEMS – BASE COATS

Application
Structural Skin is applied from 1/8 to 1/4 inch thick
over concrete block, brick or concrete to create a uniform,
waterproof surface. Add 2 quarts of K-88 Admix for
Exterior Wall Systems. Add 1 gallon of K-88 Admix for
applications of polystyrene foam. Add 1 quart of K-88
Admix for applications over concrete, brick or other
dense substrates. Structural Skin eliminates the need
to re-point masonry prior to coating. Use Structural Skin
on both sides of dry stacked (eliminate the mortar joints)
concrete block to build structural walls.