EXTERIOR WALL SYSTEMS – BASE COATS

Application
Add 110 lbs. of plaster sand (30 - 70 mesh) to a 50 lbs. bag
of product. Conpro One Coat combines the scratch and brown
coats of conventional stucco systems into one application.
Final thickness will be 3/8 inch when applied directly to the
substrate and up to 1 inch with lath. Apply Conpro One Coat
directly to block, prepared concrete (remove the cement paste),
existing stucco and brick. Also use with stucco netting,
metal or plastic lath. A wide variety of trowel, roller and spray
finishes are possible to achieve the desired appearance.