The chart below will assist you in making the best coating choice for your application. Choose the three most important performance requirements. The values are: 5 = Best Available; 4 = Excellent; 3 = Above Average; 2 = Satisfactory; 1 = Not a Characteristic of the Product. The higher the total the better suited the coating is to your application.
 
       
Breathable 5 5 3 3 4 4 5 5
Flexible 1 1 5 2 2 5 2 2
Moisture Protection 4 4 5 3 3 5 4 3
Long-Term Durability 4 5 4 3 3 3 4 3
Carbonation Mitigation 5 5 5 3 2 5 4 2
Fade Resistance 5 5 4 4 4 4 4 4
Crack Bridging 1 1 5 1 1 5 1 1
Dirt Pick-Up/Stain Resistance 5 5 3 4 4 1 2 4
Abrasion Resistance 2 2 4 4 4 4 5 5
Fungus/Mildew Resistance 5 5 4 4 4 4 3 4
Maintenance Requirement 4 5 4 3 4 4 3 4
Opacity/Hiding Power 3 2 5 4 3 5 3 3
 
Total of Characteristics - - - - - - - -
             
MATERIAL COST CALCULATOR
 
0 of 3
  
             
Material Cost Index 1.5 1.6 2.4 1.0 0.9 7.4 4.4 0.9
To compare the applied cost (price per gallon divided by square foot coverage of a single coat) 1) Choose a product from the window below. 2) The default cost per square foot will appear. Accept the default or enter a cost based on information provided by your Conproco dealer. 3) Enter the number of square feet to be coated. 4) This will provide a cost comparison of the coatings.
 
1) 
2) Base costs per square foot  
3) Project Square Foot Area 
                 
Costs per square foot 
 0.16 0.17 0.26 0.11 0.09 0.79 0.47 0.09
4) Material Cost Estimate $
 0 0 0 0 0 0 0 0
 
 
Please view legal statement copyright © 2005 Conproco Corporation