SYRACUSE, NEW YORK

Project History
The Hookway Fields have been used for Syracuse University
Athletics and Recreational Services for about 50 years.
The project was specified for two types of exterior wall
systems, Impact CM and Impact RM. Impact CM is directly
applied to the CMU and Impact RM (Reinforcing Metal) is a
wall system that is mechanically fastened to the wood with
metal lath. Trim accessories were used for all joint details.
This was especially important between the transitional joint
between the different systems. The lower portion of the
building was a block substrate; so Structural Skin (with K-88
Admix) was applied directly. The upper portion was a wood
substrate and required a building wrap with metal lath
prior to the base coat. After the base coat was applied at a
thickness of 3/16 inches, white Conpro Stucco (with K-88
Admix) was applied at 1/8 inches thick. Once the stucco
had cured, one coat of Super Color Stain VO was applied
to insure the buildings had a consistent color.

Time Frame – Summer 2004

Architect
Environmental
Design &
Research, PC,
Syracuse, NY

Contractor
Ballard
Construction,
Syracuse, NY

Sub-Contractor
J.V. Sgroi Co., Inc.,
Syracuse, NY