CONCRETE REPAIR – VERTICAL AND OVERHEAD

Application
Mix with water to a stiff mortar-like consistency.
Mix only an amount that can be used within 5 to 10 minutes.
Place in lifts up to 4 inches. Allow to become thumb-print
hard before placing the next lift. 5 to 10 minute set time
depending on temperature. Finish with trowel or sponge float.
Replace 1 quart of water with an equal amount of K-88 Admix
(per 50 lb. bag) to produce a polymer-modified repair mortar.
Add up to 30 lbs. of 3/8 inch aggregate to deep repairs
(greater than 2 inches).